Soldering!!!!!  well thats me out

If I had a bit of spare cash I would buy another one and have a spare station.

Reading all the advise and following all links etc I am now up to around $3,000.
With this latest piece of advise I am now on $6,000.
Think it is time to change my hobby

On the serious side. This has been interesting reading the views of those with much bigger and supposedly better stations. I have actually come to conclusion I am better off with my cheap and nasty one. Reasons why?
Well I have 3 of them and lots of spare parts cause they are cheap enough to class as 'throw aways'.  I just head to Farmlands and order whatever I want. Easy. It rarely lets me down. When it does I just change part and worry about cleaning whatever later. I have 2 x cheapo PCs set up to run weather console. So if PC fails. Swap PC.
Sure I am missing bits but then one has to consider how many of my viewers actually would read sunshine hours, leaf and soil moisture etc. Mostly they look at temp, rain and forecast.
I have been doing our forum summaries for 10 months or so now. You all have your down times, you all throw crazy values from time to time. There does not seem to be a difference what stations you are running or software you are using everyone 'falls off' now and again. Some alas more than others.

However I want to play with the big boys so I will be buying that which has been suggested above, wireless and no 1 wired anything....lol
My next question is, who is going to do all this soldering for me that Tony speaks of 

yes, the spider thing in the rain guage can catch you out...if a spider web causes the tipping spoon to be not seated at either end, you can end up with biblical rains!

Just bumping this topic along again.  My La crosse has had a final failure - from young calves chewing cables, to me trying a fix and inadvertantly plugging the anemometer cable into the rain bucket position which has 5v + and - across two contacts which i think did the anemometer comms board in and it won't talk anymore, so it only displays temp, humidity and barometer - sighhh.

I have gone for the Irox Pro X2  from the Weather Station Co near Warkworth / Lee  for $695 + $20 frt.

http://www.weatherstation.co.nz/shop/iROX.html



   

I have photos of the units open as I strip them for battery plastic strip pulls and will make a project out of the install.


Clock function: actual time, date and day, several alarms, advanced alarms depending on outside temperatures
Sunrise/sunset function: displays sunrise/sunset times for your location
Moon phase function: displays actual moon phase and previews and reviews +- 39 days
Barometer: displays atmospheric pressure and weather forecast
Thermometer/Hygrometer: indoor temperature/humidity and wireless reception of outdoor temperature/humidity via remote sensor (1 sensor is included and up to 5 sensors can be used). Temperature can be set to activate if outdoor temperature falls below or rises above a certain temperature.
Dew point for thermo/hygro indoor and outdoor
Rain Gauge: measures rain rate (history of total rainfall for past 24 hours, day, week and month)
Wind: solar powered anemometer with rechargable batteries and backup alkaloine, measures actual wind speed, gust peaks, wind direction, wind-chill temperature
History: the main unit records over 3'000 data sets which can be downloaded to your PC via USB-cable for further analysis (software included)
Dimensions main unit: (H,W,D) 220 x 165 x 32 mm
Batteries for main station and all remote sensors included
Brand: iROX of Switzerland

Cheers

Graeme

No, just like the La Crosse I had, and most other station equipment too, it is missing both a solar sensor and UV sensor.  I must get my 1-Wire network up and running again so I can have cloud cover estimation working again!! - Even at night!!  I got despondent with the old LC when the inquisitive calves from next door were using our little back paddock and they started chewing on anything visible - a small loop of cable before it entered the conduit tube was all it took in several places!!  Aaaarrrggh!  So was the line back inside to base unit, rain bucket cable, and anemometer cable all got some interest from the chewing calves!!  Then the draft fan died, found no juice in cable but also fan Was dead!  So a few things yet to fix before this station goes live.

Hopefully this weekend will see it connect to my website.

The unit is very well made - all battery encosures have up to 8 machined screws which screw into brass fittings embedded in the plastic casing, and each panel as a matching o-ring seal on the main body.  However, these screws are easily flicked, dropped and lost...

The anemometer has a solar power panel for a rechargeable and also two alkalines for nighttime and cloudy weather.

So - unlike the Davis Vantage View which has everything integral - great for some locations, these are individual components and easily placed apart in more appropriate positions - if you feel you need to!  As each is radio connected.  433MHz I think. 30m distance so it says.

The base unit has so many options on the control panel (and has a remote which is very useful) flip open option/control buttons and switching from one parameter to another within the same part of the panel is a trick I have yet to master other than by accident!!  (it is not a touch screen). But yes, it is a hobby!!  And yes, I got growled at by the OH despite it being my birthday and my (our) money!!  HEHE!

Graeme

More to come in a project methinks.

Well dredging up an old topic but one commonly visited I hope by new members.

My Irox has given me some grief, despite the quality of the build and assembly.

The outside hygro (temp and humidity) has had a series of non communication with the inside console, giving huge breaks in my data.  The answer was to open the right hand side flap to give access to buttons and use the second button down - hold for 5 secs and it starts searching again for a hygro.  All very well, but often it never finds it, or holds it only for 30mins.  It seems to be locked on well enough now (after an 8 week vacation in Europe and time to follow up on it) after many trials and button pressings.

Another feature I was disgruntled about was the very coarse rain bucket captures.  I have multiplied this 2.4 times in sensitivity with a 150mm (6") funnel and an adjustment factor in Weather Display.

While during a storm this year and low then very high barometric pressures, I found it sluggish to move but at the height of the 1032mB which lasted several days, the IROX only got to about 1029mB - quite disappointing.

Wind speed recording is also quite sluggish and over a long period - 30secs or something I think the manual said (temp is over 90secs).  My previous station, the cabled La Crosse had an 8sec new data update (all values), and it had a good capture of gusts.  My gusts are quite a bit down on the two Davis units in town.

Also, during strong rain storms, my anemometer stops communicating - i expect the signal from above the iron roof is too weak when the roof is wet and earthed and the console is inside nearly directly below, hmmm!

So overall not a happy camper and as well, my usb 1-Wire network has not behaved for some time now

But it is a hobby and somewhere between things like expenditure and value there exists a compromise!

it is a nice station and communicates well and quickly with Weather Display although it has gone missing a couple of times ?? LOL!

And then there is the story of a UPS - Uninterrupted Power Supply (or Unreliable Power Supply) which I have not extended to yet.  There is always something to improve upon and most things need both time and money!!

For starter kit, it seems the Aercus or Fine Offset are a good compromise in price and reliability and reasonable data quality (several are using them).

I may be on the lookout for another "splittable" independent sensor WS shortly!!

Cheers

Graeme

I had my first weather station for less than one week, as I soon discovered it was not what I expected/wanted.  Replaced it in July 2008 with a Davis VP2.  I have been lucky, since that time I have replaced the ISS battery once, because I thought I should about 5 years ago, and nothing since.  It keeps on turning and sending data without fail to my console and to my Envoy which is connected to my weather computer.  Our weather goes from about -30°C in the winter to about 35°C in the summer, including occasional totally covered by snow.  I have thought about FARS, and likely will get that when I decide I should get a new clean VP2 (mine is quite dirty and faded). 

I have been very happy. 

While the Davis VP2 w/data logger is quite expense even here in North America now at about C$600, I understand much more so in other parts of the world so understand people getting a lower cost unit for their weather hobby.

Enjoying,
Paul